Krigger & Company 2013 logo - Define the Edge

Trim Type Mowers


Home -> Product Catalog -> Mowers -> Trim Type Mowers

Mowers in this category are generally riding mowers with a 5 foot to 6 foot cutting width that are typically used in a trimming application. These mowers can also be used as productivity mowers for larger areas, however the Large Rotary category mowers may be better suited for large area mowing. These mowers are shown below as either Rotary Type mowers or Reel Type:

Rotary Trim Mowers

VENTRAC MJ840 Contour Mower VENTRAC® MJ840 Contour Mower Deck
● 83" (211 cm) overall cutting width
● 3 independent decks aided by anti-scalp front rollers
● Rear discharge with flexible deflector
● Full rear rollers for even cutting and striping
● Flip-up deck design for easy maintenance
● Contour mowing with 40 degrees of motion for side decks

Shown with a:
VENTRAC® 4500Z All-Wheel Drive Articulating Tractor
● With 32hp Kubota® liquid-cooled gasoline engine
● Engine is Propane "ready" with optional LPG conversion kit
● Center articulating & oscillating frame with power steering
● Ventrac® front-mount hitch and enhanced weight transfer
● Electronic instrument panel and on-board diagnostics
● Optional dual-wheel kit also shown for 30 degree slope mowing

Click Here for a Full List of Ventrac Attachments
Jacobsen Turfcat JACOBSEN® 4WD Turfcat Model 628
● 26 hp Kubota® diesel engine
● Variable displacement pump
● Hydro traction drive
● Hydraulic implement drive and lift
● 23x10.50 front tires, 18x8.50 rear tires
● Power steering
● Fuel and temp. gauge, tow hitch, and rear bumper
● Deluxe one-piece suspension seat
● Available with a 60" or 72" H.D. Side or Rear Discharge Rotary Mowing Deck
TurfCat Data Sheet
Lastec 325EFD 72" Out Front Articulating Deck  LASTEC® 72" Out-Front Articulator Deck
Deck option, or replacement deck for out-front mowers such as the Jacobsen® Turfcat shown above

Reel Type Trim Mowers

Jacobsen Tri-King riding trim mower JACOBSEN® Tri-King 1900D Triplex Trim Mower
● 19 hp Kubota® diesel engine
● 3-wheel hydro-static drive
● Hydraulic reel lift system
● Hydraulic powered reels
● Power steering
● Power backlapping
● Can be equipped with 30" 7 Blade Cutting Units for an over-cutting width of 84" (or 26" units for a 72" cut)
● Grooved front rollers (optional)

JACOBSEN Tri-King Data Sheet
Note: Descriptions and specifications may change without notice.
This site was created by Krigger & Company, Inc. and is maintained internally.
   4360 Gibsonia Road SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing,
 Forensics, and Vulnerability Assessment Toll Free   800.252.TURF (8873)    
   P.O. Box 1427 Phone   724.444.KRIG (5744)    
   Gibsonia, PA 15044-1427 Fax    724.444.1027    
   (north of Pittsburgh, PA) email  
Copyright © 1999-2016 [Krigger & Company, Inc.] All rights reserved.