Krigger & Company 2013 logo - Define the Edge



Top Dressers and Material Handling

Home -> Product Catalog -> Top Dressers

Walking / Self Propelled | Truckster Mounted | Tow Behind | Material Handler
Related Products: Aerators  |  Spreaders

Truckster Mounted (back to top)

Turfco SP-1540TEC Spinner Top Dresser TURFCO® Wide Spin 1540-TM Truck Mount Top Dresser
● Powered by Cushman® Truckster Hi/Lo hydraulics
● 60" x 37" hopper with 19 cu. ft. capacity
● Variable spreading width up to 40 feet
● Adjustable metering gate for very fine up to a heavy 1/4" application
● With a top dressing speed up to 5 mph
● Including patented 3-position switch for spinner and conveyor control
● Adjustable spinner angle control
● Galvanized hopper for worry free, rust-proof durability
● Covered by manufacturer's 3-year warranty

Tow Behind(back to top)

TURFCO Mete-R-Matic IV  Turfco® Mete-R-Matic IV
● Including standard tow hitch
● Electric on/off switch
● 1 (one) cu. yd. capacity hopper
● With a 6 foot wide material application
● Six load-bearing turf tires for less ground pressure and consistent wheel-to-belt drive
● Material application from very light up to 1/2" thick
● Allows you to topdress at speeds up to 8 mph

(Click here for more on the Mete-R-Matic concept)
Video Link

Turfco® Mete-R-Matic XL Large Area Top Dresser
● Including standard tow hitch
● Electric on/off switch
● With a 6 foot wide material application
● Two large load-bearing turf tires for low ground pressure and consistent wheel-to-belt drive
● Material application from very light up to 1/2" thick (at 60.75 cubic feet, the hopper capacity is three times the size of the Mete-R-Matic III, for less reloading and increased efficiency on large turf areas)

(Click here for more on the Mete-R-Matic concept)
Video Link

Top Dresser / Material Handler (back to top)

 

Turfco 1550 Wide Spin Top Dresser

Turfco 1550

TURFCO® Wide Spin 1550 Tow Behind Top Dresser
● With 14hp Subaru® engine
● 69.5" x 59" hopper with 21 cubic foot capacity
● Variable spreading width up to 40 feet
● Adjustable metering gate for very fine up to a heavy 1/4" application
● With a top dressing speed up to 8 mph throttle control
● Including patented 3-position switch for spinner and conveyor control
● Four programmable application presets & on-board rate calculator
● 0-15 degree adjustable spinner angle control
● Galvanized hopper for worry free, rust-proof durability
● Covered by manufacturer's 3-year warranty
CR-7 Large Top Dresser, Material Handler TURFCO® CR-7 Material Loader/Handler/Top Dresser
● 1.8 cu. yd. capacity low-profile hopper
● Adjustable flow control
● 3-position electrically-operated remote control
● One bank 7 gpm hydraulic required from tractor
● Includes Spinners for top dressing 15' to 35' wide
● Covered by manufacturer's 3-year warranty
Turfco CR-10 Large Area Top Dresser with spinners Turfco® CR-10 Large Area Top Dresser and Material Handler
● 4 cu. yd. capacity
● Low-profile high lift hopper
● Adjustable flow control to attachments
● 3-position electrically-operated remote control
● Surge brakes on two wheels
● One bank 9 gpm hydraulic required from tractor

Click Here to learn about the advantages of the CR-10.
Note: Descriptions and specifications may change without notice.
This site was created by Krigger & Company, Inc. and is maintained internally.
   4360 Gibsonia Road SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing,
 Forensics, and Vulnerability Assessment Toll Free   800.252.TURF (8873)    
   P.O. Box 1427 Phone   724.444.KRIG (5744)    
   Gibsonia, PA 15044-1427 Fax    724.444.1027    
   (north of Pittsburgh, PA) email   sales@krigger.com  
Copyright © 1999-2016 [Krigger & Company, Inc.] All rights reserved.